Filter
Top Products
Chapter 3 Basic Operations — Switching on/off the projector
32 - ENGLISH
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely xed to the projector body to prevent it from being removed easily.
Conrm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
For details of power cord handling, refer to “Read this rst!” (
x
page 2).
Attaching the power cord
1)
Check the shapes of the <AC IN> terminal on the side of the projector body and the power cord
connector and insert the plug completely in the correct direction until you hear the hooks click in
place.
Removing the power cord
1)
Confirm that the <MAIN POWER> switch of the main side is on the <OFF> side, and remove the power
plug from the outlet.
2)
Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the
side tabs.
Power indicator
Displays the status of the power. Check the <ON (G)/STANDBY (R)> status of the power indicator before operating the projector.
3RZHULQGLFDWRU21*67$1'%<5!