Filter
Top Products
Information
60
- ENGLISH
Settings
Select [Information] from the Main Menu (see
“Navigating through the menu” on page 36),
then select the item from the sub-menu.
Remote Control
Control Panel
Input Source Information
Display
The Information Menu is used for checking the status of
the image signal being projected and the operation of
the projector.
You can also Press the <INFO.> button on the remote
control to display the Information menu.
Input
J
The selected input source is displayed.
System
J
The selected system is displayed.
H-sync freq.
J
The selected H-sync freq. is displayed.
The horizontal frequency of the input signal is displayed
in KHz, or - - - KHz when no signal.
V-sync freq.
J
The selected V-sync freq. is displayed.
The vertical frequency of the input signal is displayed in
Hz, or - - - Hz when no signal. Numbers of Hz doubles
when during Interlace.
Screen
J
The selected Screen size is displayed.
Language
J
The selected language is displayed.
Lamp power
J
The selected lamp mode is displayed.
Lamp runtime
J
The cumulative lamp operating time is displayed.
Power management
J
[Off] , [Ready] or [Shut down], and [Timer] are displayed.
Key lock
J
The selected Key lock icon is displayed.
PIN code lock
J
[Off], [On 1] or [On 2] is displayed.
Remote control
J
The selected remote control code is displayed.
Serial number
J
The serial number of the projector is displayed.
The serial number is used to service the projector.
Total power savings
J
The saved amount of power and the exhausted CO2
are displayed.
Information