Filter
Top Products
65
Basic Operations
Making Copies
Your machine has a copy function which can make single or multiple copies. When copying, your machine
will automatically select Fine resolution.
NOTE
1. The copy will be reduced automatically depending on the length of the original document. If
you wish to be prompted for the reduction ratio when making copies, change the setting of Fax
Parameter No. 32 (COPY REDUCTION) to "Manual".
If Copy Reduction is set to Manual, press % steps. (100% to 70%) and to set the
zoom ratio in 1% steps. (100% to 70%)
2. If you make a copy with Super Fine resolution, it will be reduced slightly even if the reduction
ratio is set to 100% in order to fit the data on one page.
3. Standard Resolution is not available in Copy Mode.
4. An optional D-RAM Card is required when copying a Legal size document with the settings on
Super Fine resolution and the reduction ratio at 100%. If no optional D-RAM Card is installed,
the bottom portion of the document will be cut off.
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
COPY
NO. OF COPY=1
3
Enter the number of copies.
Ex:
COPY
NO. OF COPY=10
4
The machine stores the document, then prints the copies.
* STORE * NO.005
PAGES=001 01%
* COPY *
NO. OF COPY=01/10
COPY
1 0
START