Filter
Top Products
The set-up of items other than those set using the selector switches are set on the on-screen menu using the time counter dis-
play and search dial.
To perform settings with the on-screen menu, press the MENU (SHIFT+MENU) buttons to establish the set-up mode. The set-
ting contents now appear on the display, and the data settings are stored in the laptop’s memory.
To transfer the laptop from the regular mode to the set-up menu mode, press the SHIFT and EDIT buttons together. (This can-
not be done by remote control, or when editing or recording.)
To change a setting:
! Set the laptop to the jog mode.
Remember that this procedure cannot be performed in the shuttle mode.
@ Turn the dial and select the item to be set. (The asterisk “*” moves.)
# While holding down the SHIFT button, turn the dial clockwise or counterclockwise to change the value.
When the IN or OUT button is pressed while the SHIFT button is held down, the setting contents are decremented by IN and
incremented by OUT.
If the 1ST EDIT, TC PRESET or UB PRESET item is to be selected, operation moves to the column on the left or right by
pressing the FF or REW button while the SHIFT button is held down.
• “TC PRESET” and “UB PRESET” can be selected when set-up menu item No.507 (TC MODE) has been set to “P-REC” or
“P-FREE.”
SET-UP MENU OPERATIONS
22
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
EJECT
VTR1
POWER
REC
CH1
RESET
REC
DIAG
REMOTE
EXT VTR
LOCAL-
VTR1 VTR2
CONTROL
ON
OFF
REC
INHIBIT
OFF
ON
CH2
PB
AUDIO LEVEL
REW
FF
STOP
STB OFF
TRACK
PLAY STILL
1ST EDIT
BS
EVENT
SPLIT
ASMBL
IN OUT
VTR1 VTR2 VTR1 VTR2
PREROLL
SYNCHRO
7
5
3
CF
ON
OFF
CH1
MIX
CH2
V1
V1•2
V2
SWAP
NORM
MIX
AUDIO
MONITOR
SPEAKER/
HEADPHONES
AUDIO
SWAP
DUMP LOAD
EDL
CLEAR
FS
RECALL
LAST
EDIT
VA1A2TC
PLAY
IN OUT
GO TO
ENTRY / SHIFT
EDIT MODE
COUNTER
CTL
TC
UB
VTR1
EJECT
VTR2
RESET
REC
STORE
STOP
STB OFF
MENU
EDIT
STILL
REW
FF
VTR2
REC
CH1 CH2
OPERATION MODE
VTR2 AUDIO
INPUT SELECT
EDIT
INT
EXT
SEPARATE
CH1 CH2
VTR1
EXT
PB
AUDIO LEVEL
PREVIEW
REVIEW MULTI
AUTO EDIT
ALL STOP
EDIT button
RESET button
SHIFT button
To view the menu page by page:
Press the FF or REW button.
Operation moves to the next page when the FF button is
pressed; it moves to the previous page when the REW button
is pressed. (The cursor moves to the first item in each group
of 100.)
To store a setting in the memory:
Press the REC button while the SHIFT button is held down.
To return to the regular mode from the set-up menu
mode:
Press the EDIT button while the SHIFT button is held down.
User default settings and factory settings
This unit has a memory in which the settings can be entered
by the user. The user can enter specific settings, and these
settings can be called altogether.
The factory settings can be restored after using the user settings.
TC PRESET and UB PRESET are not entered or called.
■ To enter changed settings into the user default setting
memory
• Press the MENU (SHIFT + EDIT) button to establish the
set-up menu mode.
• Change to the desired settings. (Refer to the above sec-
tion on how to change the settings.)
• Press the RESET button of VTR2 to display the default
setting screen.
• Press the STORE (SHIFT + REC) button to enter the set-
tings.
■ To return changed settings to the user default settings
(loading from the user default setting memory)
• Press the MENU (SHIFT + EDIT) button to establish the
set-up menu mode.
• Press the RESET button of VTR2 to display the default
setting screen.
• Press the FF button of VTR2.
■ To return changed settings to the factory settings
(resetting)
• Press the MENU (SHIFT + EDIT) button to establish the
set-up menu mode.
• Press the RESET button of VTR2 to display the default
setting screen.
• When the PLAY button of VTR2 is pressed, all the items
are reset.
When the STILL button of VTR2 is pressed, all the items
except for SYSTEM are reset.
When the REW button of VTR2 is pressed, the resetting
is canceled.