Filter
Top Products
3. Using the Web Interface
3-30 January 2005 6210-A2-GB23-00
Tools
The Tools tab provides access to system commands and functions.
System Commands
To make changes permanent, click on Tools (at the top of the page) and select
System Commands. The following commands are used to configure the modem:
Save all: Press this button in order to permanently save the current
configuration of the modem. If you do restart the system without saving your
configuration, the CPE will revert back to the previously saved configuration.
Restart: Use this button to restart the system. If you have not saved your
configurations, the modem will revert to the previously saved configuration
upon restarting. Connectivity to the unit will be lost. You can reconnect after
the unit reboots.
Restore Defaults: Use this button to restore factory default configuration.
Connectivity to the unit will be lost. You can reconnect after the unit reboots.
Figure 3-24. System Commands