Peerless Industries PAP 121 Projector Accessories User Manual


 
ISSUED: 12-27-01 SHEET #: 055-9073-5 03-09-05
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
Installation and Assembly - Projector Adapter Plate for
Sharp
model PG-M15X and Net TV LCD Projectors
Models: PAP 121, PAP 121-S,
PAP 121-W
Before you start check the parts list below to
make sure all of the parts shown are included.
Description
AA adapter plate
BB 1/4
- 20 x 3/8" socket pin screw
CC M3 -.5 x 25 mm thumb screw
DD 4 mm allen wrench
EE retaining spacer
FF spacer
GG M3 - .5" x 6 mm phillips pan
Parts List
Qty.
1
1
1
1
1
1
1
PAP 121
055-1207
520-1109
560-1139
560-9646
590-1128
590-0108
520-1028
Note: Actual parts may appear slightly different than illustrated.
DD
AA
EE
BB
Flip projector upside-down and attach adapter
plate (AA) using one socket pin screw (BB) and
one phillips screw (GG) as shown. Tighten screw
(BB) using 4 mm allen wrench (DD).
*Notch indicates front of projector.
Secure adapter plate with thumb screw (CC),
spacer (FF) and retaining spacer (EE) in remaining
hole.
EE
CC
*
AA
BB
GG
GG
FF
FF
PAP 121-S
055-4207
520-2109
560-7139
560-9646
590-2128
590-0108
520-2036
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners
Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
WARNING
CC
PAP 121-W
055-2207
520-2109
560-7139
560-9646
590-2128
590-0108
520-2036