Filter
Top Products
IOLAN Device Server User’s Guide 1-2
Copyright Statement
This document must not be reproduced in any way whatsoever, either printed or electronically, without the consent of:
Perle Systems Limited,
60 Renfrew Drive
Markham, ON
Canada
L3R 0E1
Perle reserves the right to make changes without further notice, to any products to improve reliability, function, or design.
Perle, the Perle logo, and IOLAN are trademarks of Perle Systems Limited.
Microsoft, Windows NT
®
/Windows 2000
®
/Windows Vista
®
/Windows Server 2003
®
/Windows 2003 R2
®
/Windows
2008
®
/Windows 2008 R2
®
/Windows XP
®
/Windows 7
®
/Windows 8
®
/Windows Server 2012
®
and Internet Explorer
®
are
trademarks of Microsoft Corporation.
Netscape is a trademark of Netscape Communications Corporation.
Mozilla Firefox is a trademark of the Mozilla Foundation.
Solaris is a registered trademark of Sun Microsystems, Inc. in the USA and other countries.
Perle Systems Limited, 2005-2013.
FCC Note The IOLAN Device Server has been found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions in this Guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his/her own
expense.
EN 55022: 1998, Class A, Note
WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Caution: the IOLAN Device Server is approved for commercial use only.
ATEX Directive Information: (ONLY APPLIES TO THE IOLAN SDS4 HL MODEL!)
In order to comply with the ATEX directive, the IOLAN SDS4 HL must be installed in an ATEX certified IP54
min. enclosure and the IOLAN SDS4 HL must be installed so that the unit’s labelling is visible after
installation.
ATEX labelling;