Filter
Top Products
250
VPN
Adding/Editing a VPN Exception
The following parameters are available:
Advanced
Field Description
Configure the following parameter:
Delete Button Highlight an Exception List entry and click the Delete button to remove the
entry from the list.
IP Address The IP address of the host that will communicate with the IOLAN outside of
the VPN tunnel.
Field Format: IPv4 or IPv6 address
Network The network address that will communicate with the IOLAN outside of the
VPN tunnel.
Field Format: IPv4 or IPv6 address
IPv4 Subnet Mask The IPv4 subnet mask for the IPv4 network.
Default: 0.0.0.0
IPv6 Prefix Bits The IPv6 prefix bits for the IPv6 network.
Range: 0-128
Default: 0
Use NAT Traversal
(NAT_T)
NAT Traversal should be enabled when the IOLAN is communicating through
a router/gateway to a remote VPN that also has NAT Traversal enabled.
Default: Enabled