Filter
Top Products
321
Management
SNMP Traps Tab Field Descriptions
Configure the following parameters:
V3 Read-Only Auth
Algorithm
Specify the authentication algorithm that will be used for the read-only user.
Data Options: MD5, SHA
Default: MD5
V3 Read-Only Auth
Password
Type in the read-only user’s authentication password.
V3 Read-Only
Confirm Password
Retype the user’s authentication password.
V3 Read-Only
Privacy Algorithm
Specify the read-only user’s privacy algorithm (encryption).
Data Options: DES, AES
Default: DES
V3 Read-Only
Privacy Password
Type in the read-only user’s privacy password.
V3 Read-Only
Confirm Password
Retype the privacy password.
Trap checkbox
Check this box to enable the entry of the trap information.
Internet Address The IP address of the SNMP manager(s) that will receive messages from the
IOLAN.
Field Format: IPv4 or IPv6 address
Version
Select the version of trap you want the IOLAN to send. Valid options are v1,
v2c or v3.
Default: v1