Filter
Top Products
328
Management
You must have a SFTP/TFTP server running on any host that you are uploading or downloading files
to/from. When you specify the file path, the path must be relative to the default path set in your
SFTP/TFTP server software.
Configure the following parameters:
EasyPort Web
Select Java if communication is via port 23(Telnet) or port 22(SSH) and the
IOLAN is not restricted by a firewall.
Select Javascript if you need to communicate through a firewall on port 8080
using EasyPort Web.
To end and close a Telnet session, type CTRL] then type quit
To end and close a SSH session, on a new line type ~. (period).
Firmware Host The host name or IP address of the server that contains the firmware file. If you
use a host name, it must exist in the IOLAN’s host table or be resolved by
DNS.
Field Format: Resolvable host name, IPv4 address, IPv6 address
Firmware File The path and file name, relative to the default path of your TFTP server
software, of the update software for the IOLAN that will be loaded when the
IOLAN is rebooted.
Fir
Firmware, Use
SFTP
Check this box if you wish to use SFTP (Secure File Transfer Protocol) instead
of TFTP (Trivial File Transfer Protocol). The IOLAN will use the SFTP server
information entered under the SFTP tab.
Configuration Host The host name or IP address of the server that contains the configuration file. If
you use a host name, it must exist in the IOLAN’s host table or be resolved by
DNS.
Field Format: Resolvable host name, IPv4 address, IPv6 address
Configuration File The path and file name, relative to the default path of your TFTP server
software, of the configuration file for the IOLAN that will be loaded when the
IOLAN is rebooted.
Configuration, Use
SFTP
Check this box if you wish to use SFTP (Secure File Transfer Protocol) instead
of TFTP (Trivial File Transfer Protocol). The IOLAN will use the SFTP server
information entered under the SFTP tab.