Filter
Top Products
366
Configuring HTTP Tunnels
Configuring HTTP Tunnels
Serial-to Serial
The following example will demonstrate how to set up a serial device (VT100 Terminal) to serial
device (Linux host, console port) connection via an HTTPS tunnel. HTTPS will be used because data
security is required. Because IOLAN 1 is behind the firewall, it will need to initiate the HTTP tunnel
connection.
For more HTTP tunneling configuration parameters see HTTP Tunneling
Configure a “connect to” HTTP tunnel on IOLAN 1
Note:
When HTTP tunneling is used TCP and UDP ports 50000 and above are reserved and
should not be configured by the user.
Internet
100.10.50.2
100.10.50.1
IOLAN 1
IOLAN 2
HTTPS Tunnel--Encrypted Data
VT100
Linux Host
Console Management
Terminal
IP address of IOLAN 2
Check HTTPS for
secure tunnel con-
nection. This must
match configuration
on IOLAN 2
Match name on IOLAN 2