Filter
Top Products
RADIUS and TACACS+ 380
RADIUS
61 NAS-Port-Type Response For reverse telnet and reverse ssh connections, a
type of Virtual (5) will be sent. For a PPP
connection type a type of Async (0) will be sent.
For all direct connect service types a type of Async
(0) will be sent.
87 NAS-Port-Id Response For sessions originating from the serial port:
<line-name> or “SERIAL:xx”, where xx starts
at serial port 1.
For reverse Telnet and SSH Ethernet sessions:
“ETH:REVSESS:xx”, where xx is the serial
port being accesses, otherwise 00 for a ILOAN
management session.
For Device manager sessions:
“DEVMGR”
For HTTP sessions:
“HTTP”
95 NAS-IPv6-Address Response The IPv6 address of the IOLAN.
96 Framed-Interface-Id Response The remote IPv6 interface identifier for the remote
end of the PPP link.
98 Login-IPv6-Host Response8 For LOGIN and CALLBACK service types, the
IPv4 address of the login host is sent to the radius
accounting host.
99 Framed-IPv6-Route Response When the PPP IPv6 interface comes up, the IOLAN
will add routes to the user’s PPP interface in the
same order they were received.
Type Name Description