Filter
Top Products
303
Management
Internet Address The IP address of the SNMP manager that will send requests to the IOLAN. If
the address is
0.0.0.0, any SNMP manager with the Community name can
access the IOLAN. If you specify a network address, for example
172.16.0.0, any SNMP manager within the local network with the
Community name can access the IOLAN.
Field Format: IPv4 or IPv6 address
Permissions Permits the IOLAN to respond to SNMP requests.
Data Options:
z None—There is no response to requests from SNMP.
z Readonly—Responds only to Read requests from SNMP.
z Readwrite—Responds to both Read and Write requests from SNMP.
Default: None
V3 Read-Write
User
Specified user can view and edit SNMP variables.
V3 Read-Write
Security Level
Select the security level for the Read-Writer user. This must match the
configuration set up in the SNMP manager.
Data Options:
z None—No security is used.
z Auth—User authentication is used.
z Auth/Priv—User authentication and privacy (encryption) settings are
used.
Default: None
V3
V3 Read-Write
Auth Algorithm
Specify the authentication algorithm that will be used for the read-write user.
Data Options: MD5, SHA
Default: MD5
V3 Read-Write
Auth Password
Type in the read-write user’s authentication password.
V3 Read-Write
Confirm Password
Retype the user’s authentication password.
V3 Read-Write
Privacy Algorithm
Specify the read-write user’s privacy algorithm (encryption).
Data Options: DES, AES
Default: DES
V3 Read-Write
Privacy Password
Type in the read-write user’s privacy password.
V3 Read-Write
Confirm Password
Retype the privacy password.
V3 Read-Only User Specified user can only view SNMP variables.
V3 Read-Only
Security Level
Select the security level for the Read-Only user. This must match the
configuration set up in the SNMP manager.
Data Options:
z None—No security is used.
z Auth—User authentication is used.
z Auth/Priv—User authentication and privacy (encryption) settings are
used.
Default: None