Filter
Top Products
RADIUS and TACACS+ 351
RADIUS
Mapped RADIUS Parameters to IOLAN Parameters
When authentication is being done by RADIUS, there are several Serial Port and User parameters
that can be set by the RADIUS server. Any parameters sent by that RADIUS server that are not
supported by the IOLAN are discarded. Below is a list of the RADIUS parameters and their IOLAN
parameters:
Service-Type This has no IOLAN field, although it needs
to be set to
Framed-User in the RADIUS
server.
Framed-Protocol Set to SLIP or PPP service.
Framed-Address Remote IP Address field under either SLIP
or PPP.
Caution: the exception to the above rule is
a
Framed-Address value of
255.255.255.254. When this value is
specified in the RADIUS file, the unit will
use the Remote IP address configured for a
PPP line in the IOLAN.
Framed-Netmask IPv4 Subnet Mask field under either SLIP
or
PPP.
Framed-Compression VJ Compression field under either SLIP or
PPP.
Framed-MTU MTU field under SLIP.
MRU field under PPP.
Idle-Timeout Idle Timeout under the serial port
Advanced settings.
Login-Service Corresponds to one of the following User
Service
parameters: Telnet, Rlogin, TCP
Clear, SSH, or SSL Raw.
Session-Timeout Session Timeout under the serial port
Advanced settings.
Callback-Number Combination of the Enable Callback and
Phone Number fields under User,
Advanced settings.
Callback-ID Combination of the Enable Callback and
Phone Number fields under User,
Advanced settings.
RADIUS Parameter IOLAN Parameter