Filter
Top Products
100
Advanced
Advanced
Host Table
Overview
The Host table contains the list of hosts that will be accessed by an IP address or Fully Qualified
Domain Name (FQDN) from the IOLAN. This table will contain a symbolic name for the host as
well as its IP address or FQDN. When a host entry is required elsewhere in the configuration, the
symbolic name will be used.
Functionality
You can configure up to 50 hosts using IPv4 or IPv6 internet addresses on desktop IOLAN models;
you can configure up to 100 hosts on rack mount and medical unit IOLAN models.
Field Descriptions
Configure the appropriate parameters:
IP Filtering Data Options:
z Allow all traffic—Allows any host to connect to the IOLAN.
z Allow only defined traffic
Allow traffic only to/from hosts defined with IP
addresses—A security feature that when enabled, the
IOLAN will only accept data from or send data to hosts
configured in the IOLAN’s
Host Table.
Allow traffic to/from address range—A security feature
that when enabled, the IOLAN will only accept data from
or send data to hosts configured within this IPV4 address
range.
Default: Allow all traffic
Add Button Adds a host to the host table.
Edit Button Changes a host that already exists in the host table.