Filter
Top Products
134
Serial Port Profiles
Configure the following parameters:
Connect to remote
system
When enabled, the IOLAN initiates communication to the TruePort client.
Default: Enabled
Host Name The configured host that the IOLAN will connect to (must be running
TruePort).
Default: None
TCP Port The TCP Port that the IOLAN will use to communicate through to the TruePort
client.
Default: 10001 for serial port 1, then increments by one for each serial port
Connect to
Multiple Hosts
When enabled, the IOLAN will establish a connection to multiple clients
(Hosts). When using the multiple hosts feature, all TruePort clients must be
running in Lite mode.
Default: Disabled
Send Name on
Connect
When enabled, the port name will be sent to the host upon session initiation. This
will be done before any other data is sent or received to/from the host.
Default: Disabled
Define Additional
Hosts Button
Click this button to define the hosts that this serial port will connect to. This
button is also used to define the Primary/Backup host functionality.
See Adding/Editing Additional TruePort Hosts for more information.
Listen for
Connection
When enabled, the IOLAN will wait for connections to be initiated by the
TruePort Client.
Default: Disabled
TCP Port The TCP Port that the IOLAN will use to communicate through to the TruePort
client.
Default: 10001 for serial port 1, then increments by one for each serial port