Philips 3121 233 42852 Barcode Reader User Manual


 
3121 233 42852
Quick Use and Setup Guide
BASIC TV CONNECTIONS
75
L
AUDIO
R
AV out
2
1
CVI
AV in
Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1
Making Basic TV Connections
Basic Cable TV Connections . . . . . . . . . . . . . . . . . .1
Basic Antenna TV Connections . . . . . . . . . . . . . . . .1
Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote Battery Installation . . . . . . . . . . . . . . . . . . .2
Remote Control Button Descriptions . . . . . . . . . . . .2
How to Use the Installation Features . . . . . . . . . . .3-4
Using the Onscreen menu . . . . . . . . . . . . . . . . . . . . .3
Using the Language Control . . . . . . . . . . . . . . . . . . .3
Setting the Tuner Mode Control . . . . . . . . . . . . . . . .3
How to Automatically Program Channels . . . . . . . . .3
How to Add and Delete Channels . . . . . . . . . . . . . . .4
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
IMPORTANT
NOTE: This owner's manual is used with several
different television models. Not all features (and
drawings) discussed in this manual will necessar-
ily match those found with your television set.
This is normal and does not require that you con-
tact your dealer or request service.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
Color TV
Color TV
CONTENTS
Y
our Cable TV input into your home may be a single (75 ohm)
cable or a converter box installation. In either case, the con-
nection to the TV is very easy. Follow the steps below to connect
your cable signal to your new television.
If your cable signal comes directly from a round 75coaxial
cable use the following steps:
1
Connect the open end of the round Cable Company sup-
plied cable to the 75 input on the TV. Screw it down finger
tight.
2
Plug the television in to the wall outlet and turn the TV on.
Refer to the AUTO PROGRAM feature to program all the
available channels on your cable signal.
If your cable signal comes from a cable box, use the following
steps:
3
Connect the open end of the round Cable Company sup-
plied cable to
the cable signal IN(put) plug on the back of
the Cable Box.
4
Using a separate round coaxial cable, connect one end to the
OUT(put) plug on the back of the Cable Box.
5
Connect the other end of the round coaxial cable to the
75 input on the back of the television. Screw it down finger
tight.
6
Plug the television in to the wall outlet and turn the TV on.
Refer to the TUNER and AUTO PROGRAM features on
page 3 of this Quick Use Guide. TUNER should be set to the
CABLE option. AUTO PROGRAM can be set to program all
the available channels on your cable signal into the televi-
sion’s memory.
CABLE TV
75
L
AUDIO
R
AV out
CVI AV in
OUTPUT
INPUT
5
6
3
4
Direct Cable Connection:
Cable Box Connection:
Cable signal
coming from
Cable Company
(Round 75
coaxial cable)
Jack Panel Back of TV
AC Power
Wall Outlet
Power Plug
from back of TV
Jack Panel Back
of Cable Box
Cable Signal IN from
the Cable Company
Round 75
Coaxial Cable
Jack Panel Back of TV
AC Power
Wall Outlet
Power Plug
from back of TV
A
combination antenna receives normal broadcast chan-
nels (VHF 2–13 and UHF 14–69). Your connection is
easy because there is only one 75 (ohm) antenna plug on
the back of your TV, and that’s where the antenna goes.
1
If your antenna has a round cable (75 ohm) on the end,
then you're ready to connect it to the TV.
If your antenna has flat, twin-lead wire (300 ohm), you
first need to attach the antenna wires to the screws on a
300- to 75-ohm adapter.
2
Push the round end of the adapter (or antenna) onto the
75 (ohm) plug on the back of the TV. If the round end of
the antenna wire is threaded, screw it down finger tight.
3
Plug the television in to the wall outlet and turn the TV
on.
Refer to the TUNER and AUTO PROGRAM features on
page 3 of this Quick Use Guide. TUNER should be set to the
ANTENNA option. AUTO PROGRAM can be set to program
all the available channels on your cable signal into the televi-
sion’s memory.
ANTENNA TV
75
L
AUDIO
R
AV out
CVI
AV in
1
3
2
Antenna Connection:
Jack Panel Back of TV
Power Plug
from back of TV
AC Power
Wall Outlet
Round 75
Coaxial Cable
from Antenna
Twin
Lead Wire
300 to 75-ohm
Adapter
Outdoor or Indoor Antenna
(Combination VHF/UHF)
The combination antenna receives normal
broadcast channels 2-13 (VHF) and 14-69 (UHF).
NOTE: If your cable box uses
separate Audio Outputs, the
connection will have to be
made at the TV’s Audio L & R
AV in jacks.