Philips AQ 4050 Microcassette Recorder User Manual


 
Instructions for use
AQ 4050
Radio Cassette Recorder
DIGITAL
COMPACT CASSETTE
TC text/CvB/9630.2
AQ 4050 - Radio Cassette Recorder
å Australia ˆ New Zealand
Guarantee for Australia
The benefits given to the purchaser by this
warranty are in addition to all other rights and
remedies, which, under the Trade Practices Act
or other Commonwealth or State law, the
purchaser or owner has in respect of the product.
The Philips product carries the following
warranties:
C-series HiFi-systems 12 months.
Compact Disc Players: 12 months.
Home Audio Systems: 6 months.
Clock radios, portable radios, cassette
recorders, cassette players and radio recorders:
90 days.
Any defect in materials or workmanship occurring
within the specified period from the date of
delivery, will be rectified free of charge by the re-
tailer from whom this product was purchased.
Note: Please retain your purchase docket to
assist prompt service.
Conditions of this warranty
1. All claims for warranty service must be made
to the retailer from whom this product was
purchased. All transport charges incurred in
connection with warranty service or
replacement will be paid by the purchaser.
2. These warranties do not cover batteries and
extend only to defects in materials or
workmanship occurring under normal use of
the product where operated in accordance with
our instructions.
Philips
Consumer Products Division
Technology Park
Figtree Drive, Australia Centre
Homebush 2140
New South Wales
Guarantee for New Zealand
Thank-you for purchasing this quality Philips
product.
Philips New Zealand Ltd guarantees this product
against defective components and faulty
workmanship for a period of 12 months. Any
defect in materials or workmanship occurring
within 12 months from the date of purchase
subject to the following conditions will be
rectified free of charge by the retailer from whom
this product was purchased.
Conditions
1. The product must have been purchased in
New Zealand. As proof of purchase, retain the
original sales docket indicating the date of
purchase.
2. The guarantee applies only to faults caused by
defective components, or faulty workmanship
on the part of the manufacturer.
3. The guarantee does not cover failures caused
by misuse, neglect, normal wear and tear,
accidental breakage, use on the incorrect
voltage, use contrary to operating instructions,
or unauthorised modification to the product or
repair by an unauthorised technician.
4. Reasonable evidence (in the form of a sales
docket) must be supplied to indicate that the
product was purchased no more than
12 months prior to the date of your claim.
5. In the event of a failure, Philips shall be under
no liability for any injury, or any loss or damage
caused to property or products other than the
product under guarantee.
This guarantee does not prejudice your rights
under common law and statute, and is in addition
to the normal responsibilities of the retailer and
Philips.
How to claim
Should your Philips product fail within the
guarantee period, please return it to the retailer
from whom it was purchased. In most cases the
retailer will be able to satisfactorily repair or
replace the product.
However, should the retailer not be able to con-
clude the matter satisfactorily, or if you have
other difficulties claiming under this guarantee,
please contact
The Guarantee Controller
Philips New Zealand Ltd.
4 P.O. Box 41.021
Auckland
3 (09) 84 94 160
fax 3 (09) 84 97 858
IOIOIO
IOIOIO
IOIOIO
IOIOIO
IOIOIO
IOO
IOO
Radio Cassette Recorder
IOOO
IOIIOI
IOIIOI
IOII OI
IOIIOI
IOII OI
IOIIOIO
IOIIOI
IOII OI
IOII OI
IOO
IOO
Radio Cassette Recorder
IOOO
IOIIOI
IOIIOI
IOII OI
IOIIOI
IOII OI
IOIIOIO
IO
IIOI
IOII OI
IOII OI
IOIOIO
IOIOIOI
FM 88 I
92
I
94 I 96
I
100
I
104
I
108 MHz
AM 522 530
650 800
1000
1300
1607 kHz
FM 88 I
92
I
94 I 96
I
100
I
104
I
108 MHz
AM 522 530
650 800
1000
1300
1607 kHz
DYNAMIC
BASS BOOST
ONE
TOUCH
RECORDING
REC PLAY
DYNAMIC
BASS BOOST
ONE
TOUCH
RECORDING
REC PLAY
FITTING A MAINS PLUG
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
Remove fuse cover and fuse.
Fix new fuse which should be a BS1362 5A,
A.S.T.A. or BSI approved type.
Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.
HOW TO CONNECT A PLUG
The wires in the mains lead are coloured in
accor
dance with the following code:
BLUE – “NEUTRAL” (“N”) and BROWN –
“LIVE” (“L”). As these colours may not corre-
spond with the colour markings identifying the
terminals in your plug, proceed as follows:
The BLUE wire must be connected to the ter-
minal which is marked with the letter “N” or
coloured BLACK.
The BROWN wire must be connected to the
terminal which is marked with the letter “L”
or coloured RED.
Do
not
connect either wires to the earth ter-
minal in the plug which is marked by the let-
ter “E” or by the safety earth symbol or
coloured green or green-and-yellow.
Before replacing the plug cover, make certain
that
the cordgrip is clamped over the sheath of the
lead – not simply over the two wires.
NOTE
The severed plug must be disposed to
avoid a possible shock hazard should it be
inserted into a 13A socket elswhere.
IMPORTANT NOTE FOR USERS IN THE U.K.