Filter
Top Products
9 ENGLISH
Before installation, please check your monitor for physical damages which may have
occurred during transport, and also check that the package includes all the items below:
´ Your new monitor (including pedestal)
´ Power cord
´ User manual
´ Signal cable (optional)
In case any items are missing or damaged, please contact your dealer or supplier.
This chapter explains in detail how to safely unpack and position your new display:
Caution: please remember that your monitor weights approximately:
MGD 203 24 Kg (52.9 lbs);
MGD 403 32 Kg (70.5 lbs);
therefore to avoid injury, you should not lift it by yourself: two people are required.
1. To safely lift the monitor, position one hand below the top front mask and the other
one below the bottom of the backcover.
2. Place the monitor only on a strong table or a desk. Avoid placing your monitor on
top of a computer.
To minimise glare and reduce eye fatigue, it is recommended to place your monitor in the
following positions:
´ avoid direct sunlight or other bright light source;
´ keep the screen lower than your eyes (with an angle of 20° respect to the ideal
horizontal line;
´ set the monitor to ”1 gun mode”, when full brightness is not required;
Retain your original packing, which is ideal and safe, in case you need to transport
your monitor in the future.
The MGD 203/MGD 403 monitor is equipped with a tilt swivel base which will allow you to
position the display at a comfortable viewing angle.
The base rotates 140° to the right and to the left (a stop prevents further rotation) and 5°
top / forward plus 15° top / backwards.
A duly designed metal bracket is also available as option for both MGD203 and MGD403
when a ceiling or trolley mount application is requested.
INSPECTION
UNPACKING
Suggestions !
Important !