Philips MGD403 Computer Monitor User Manual


 
ENGLISH 10
Follow these steps to connect the MGD 203/MGD 403 monitor to your computer:
This monitor is equipped with a standard European or North American or United Kingdom
power cord provided with ground wire (depending on where your monitor has been pur-
chased). According to the AC power standards utilised in your Country, you may be
required to purchase a different power cord.
THE SOCKET OUTLET TO WHICH THE UNIT IS CONNECTED SHALL BE INSTALLED
NEAR THE EQUIPMENT AND SHALL BE EASILY RECOGNIZABLE AND ACCESSI-
BLE AND/OR THE POWER LINE SHALL BE PROVIDED WITH AN EASILY RECOG-
NIZABLE CIRCUIT BREAKER.
- Connect the monitor to a grounded outlet.
- This equipment can be connected to an IT power system with phase voltage of
230 VAC.
POWER LED COLOUR
In X-ray systems context, the red light indicates that the system is not working with opti-
mal Image Quality; user could work in a hazardous condition. Press both + and - ref. keys
contemporary; LED light turns green, and the optimal Image Quality shall be restored.
CONNECTING YOUR
MONITOR
Connection to the mains
Warning !
!
Important !
figure 1
1. Remove the connector protection from the rear cover.
2. Connect the female plug of the power cord to the
mainssocket on the back of the monitor (see figure 1).
3. Connect securely the male plug of the power cord to the AC
power supply outlet.
All the world AC power voltages (100 - 240 Vac) and frequen-
cies will be automatically selected. You do not need to check
the voltage or change any fuses.
Important !
Please, be sure the AC power of your computer or any one
else in the chain (if Daisy Chain mode is used) is ‘OFF’
before connecting any display peripheral. You may cause
serious personal injury as well as permanent damage to
your computer equipments.
Warning !
!
End of life disposal
Your new set contains materials which can be recycled and reused. Specialized compa-
nies can recycle your product to increase the amount of reusable materials and to mini-
mize the amount of material to be disposed of.
Please, inform yourself on local regulations on disposal of your old set.