17 ENGLISH
GLOBAL MENU CONTROLS
The commands associed to the global menu are trasmitted over daisy chain (if enabled), and the other monitors connected receive and execute the
commands. A pop-up window appears with a message to indicate a change: e.g.
The message window will be displayed on all applicable units.
´3-GUNS / 1-GUN (BRIGHT. HI / LOW)
This function makes sense only if 1-BNC input signal is selected. In this case it is possible to switch between 3-GUNS (Hi-brightness) mode and
1-GUN (Low-brightness) mode.
If the active selection is 1-GUN (Low-brightness) the front LED indicator is set to Red. In the other input selection cases (3-BNC or D-SUB) this func-
tion is locked to 3-GUNS mode. The message shown on the OSD window will be:
‘3-GUNS Locked’.
Pressing the “SELECT” key, the current active mode is TOGGLED.
´DEGAUSS
When the Global Menu window is displayed locally on the screen, if ‘DEGAUSS’ item is highlighted:
Pressing the “SELECT” key, the Degaussing function is executed locally (degaussing circuit is operated once).
MODE
REF. SETTING 3
GLOBAL MENU
SEL EXIT - +
3-GUNS
DEGAUSS
KEYLOCK ALL
GLOBAL MENU
SEL EXIT - +
1-GUN
DEGAUSS
KEYLOCK ALL