Philips MGD403 Computer Monitor User Manual


 
19 ENGLISH
´REFERENCE SETTING
Five different Brightness/Contrast parameters pairsare available (Factory preset).They are identified with a number in the range 1-5. These val-
ues can be modified using OSD Service Local Menu item STORE REF. SET. The Reference Setting #n choice defines which pair of Brightness’
and Contrast’ parameter is to be used when Reference Setting Recallor Store Ref. Set.function is activated.
When the Special Function Menu window is displayed on the screen, if REF. SETTING (1/2/3/4/5)item is highlighted:
Pressing the SELECT key, the Reference id. number displayed on the line rotatesstarting from the current setting through all of the 5 possible
choices, at the same time the newly selected reference becomes the active one. If the Daisy Chain Modeoption is enabled, the proper daisy chain
command sequence is transmitted over the Daisy Chain Line and all other monitors execute the same function.
´LOCAL MENU
When the Global Menu window is displayed on the screen, if LOCAL MENUitem is highlighted:
Pressing the SELECT key, the GLOBAL Menu window is replaced by the Local Menu window:
GLOBAL MENU
SEL EXIT - +
KEYBOARD LOCK
ABC FULL
REF. SETTING 5
GLOBAL MENU
SEL EXIT - +
ABC FULL
REF. SETTING 1
LOCAL MENU
LOCAL MENU
SEL EXIT - +
ABC MASTER ON
POWER SAV. ON
AUTO DEG. OFF
DAISY ADDR. 6
DAISY-CH. ON
ORBITING OFF
LIGHT BAR ON
OSD REVERSE
OSD POSITION
SHOW CONFIG.
STORE REF. SET.
H. SIZE
V. SIZE
H. SHIFT
V. SHIFT
TILT
ABC BRIGHTNESS
ABC CONTRAST
SERVICE MENU