Filter
Top Products
ENGLISH 22
´ORBITING
When enabled, the function causes a very slow movement of the image displayed on screen, shifting few millimeters upward, leftward, downward
and rightward in order to reduce the “ PRINTING” effect on the screen due to browning of glass and burn-in of phosphors of CRT tube displaying a
still image. The total cycle lasts about one hour.
Pressing the “SELECT” key, the previously active mode of this function item is toggled.
Note: When ORBITING function is enabled all the geometry adjustments from the OSD Local Menu are inhibited, and at the corresponding menu
line the warning message ‘ORBITING ON’ is displayed with blinking attribute. In this case, pressing the “SELECT” key once more will remove the
warning message.
´LIGHT BAR (ON / OFF)
When disabled, this function prevents the appearing on screen of Brightness & Contrast Bars, Ref. Setting, User Setting, and User Store messages,
after touching one of control keypads.
When enabled, the above mentioned messages appear (for 3 seconds) on the screen, during adjust operation from keypads.
Pressing the “SELECT” key, the previously active mode of this function item is toggled.
´OSD REVERSE
On Screen Display menu window is displayed with reversed video attributes: e.g. ‘dark background’’ will be toggled to ‘white background’’.
Pressing the “SELECT” key, the previously active mode of this function item is toggled
LOCAL MENU
SEL EXIT - +
DAISY CH. ON
INPUT = 3-BNC
ORBITING OFF
LOCAL MENU
SEL EXIT - +
INPUT = 3-BNC
ORBITING OFF
LIGHT BAR OFF
LOCAL MENU
SEL EXIT - +
ORBITING OFF
LIGHT BAR
OSD REVERSE
LOCAL MENU
SEL EXIT - +
ORBITING OFF
LIGHT BAR
OSD REVERSE