Philips MGD403 Computer Monitor User Manual


 
APPENDIX 1
The following specification are subject to change without notice. Specification limits are guaranteed for the pre-set
timings at the “nominal picture size”
TECHNICAL SPECIFICATIONS
CRT 17/21 inches - Flat square CRT - Medium persistence white phosphor type
P45 - Surface treatment Anti Glare Anti Static (AGAS) - 43% light transmis-
sion (approx.) - Dynamic astigmatic Focus
POWER SUPPLY Universal Power Supply 90 to 264 Vac, nominal range 100 ÷ 240 Vac
INPUT SIGNALS VIDEO = BNCs (VIDEO G/VIDEO RGB, V, H/H+V) and D-SUB inputs
analog 0.700 Vpp typ., Impedance = 75
SYNC = composite on video or separate composite TTL level or separate H
and V sync TTL level (+ or -), Impedance = 270
SCANNING FREQUENCIES HORIZONTAL RANGE:
MGD 203: 30 to 85 KHz (continuous/autoscan)
MGD 403: 30 to 95 KHz (continuous/autoscan)
VERTICAL RANGE:
50 to 170 Hz (continuous/autoscan)
VIDEO BANDWIDTH MGD 203: up to 1280x1024 @ 90Hz
MGD 403: up to 1600x1200 @ 75H
RESOLUTION up to 1280 x 1024 @ 90 Hz (MGD203) - 1600x1200 @ 75 Hz (MGD403)
VISUAL PERFORMANCE SPOT SIZE 0.30 mm at 120 cd/m
2
(center)
(typical) 0.35 mm at 300 cd/m
2
(center)
0.45 mm at 750 cd/m
2
(center)
EMI / RFI CISPR11/EN5011 Class B, FCC Class A, IEC 601-1-2/EN60601-1-2
SAFETY & REGULATIONS EN60950/UL1950/CSA No 950, EN601-1/UL2601/CSA No 601-1,
FDA/DHHS, RœV
MARKS AND STATEMENTS CSA NTRL/C, CE, RœV §5 (4), 21CFR Subch. J (FDA)
47CFR Part 15 Class A (FCC)
ERGONOMICS Ergonomics performance complies with ZH 1/618 and ISO9241-3
ENVIRONMENTAL CONDITIONS
OPERATING AMBIENT TEMPERATURE: 0°C ÷ +40°C
STORAGE AMBIENT TEMPERATURE: -20°C ÷ +60°C
HUMIDITY 10% ÷ 90% R.H. (non condensing)
RELIABILITY
MTBF 50.000 hours (excluding CRT)
CONNECTORS
INPUT SIGNALS CONN. 15 pins mini D-SUB and 5 BNCs
RS232 INPUT standard D-SUB
EQUIPOTENTIAL PIN External ground safety connector
DAISY CHAIN CONN. IN and OUT standard RS 485 Interface
AC POWER EN60320 C14 (EUROPE)
EXTERNAL CONTROLS
FRONT SIDE Brightness High/Low, Contrast High/Low (Multifunction keys)
REAR SIDE Power on-off
CABLES
POWER CORD