Philips PH0900L Network Card User Manual


 
Troubleshooting section.
7. If possible,send a test fax from the fax machine you just con-
nected. If you cannot send a test fax, ensure you have a dial
tone.
Dial-Up Modem
Follow these steps to connect a dial-up modem to the Philips
Wireless Phone Jack extension unit:
1. Locate an existing electrical outlet near your dial-up modem.
2. Plug the extension unit into the electrical outlet.
3. Plug one end of a phone cord into the single phone jack on
the right side of the extension unit.
4. Plug the other end of a phone cord into the phone jack on
the dial-up modem.
5. Look for a green indicator light on the front of the extension
unit. If the indicator light remains red, refer to the
Troubleshooting section.
6. Send a test call from the dial-up modem you just connected.
VoIP Phone Connection
Follow these steps to extend your VoIP phone service† to any
electrical outlet in your home using a Philips Wireless Phone
Jack for Voice/Data extension unit††:
1. Locate an existing electrical outlet near your VoIP telephone
adaptor.
2. Plug the base unit into the electrical outlet.
3. Plug one end of a phone cord into the phone jack on the
right side of the base unit labeled LINE.
4. Look for a solid red indicator light on the base unit.
5. Plug the other end of a phone cord into one of the phone
jacks on your VoIP telephone adaptor.
6. Plug the extension unit into an A/C outlet where you desire
a phone connection.
7. Connect the phone to the single phone connector on the
right side of the extension unit.
8. Look for a green light on the front of the extension unit. If
the indicator light remains red, refer to the Troubleshooting
section.
9.
Pick up the phone handset, and listen for a dial tone. If there
is no dial tone, refer to the Troubleshooting section.
EN
Connecting Other Devices
9