Philips PI3100 Tablet User Manual


 
7EN
3 Get started
Charge power
PI3100 has a built-in battery that can be
charged through the USB connector of the
supplied USB power adapter.
The rst time you use PI3100, charge PI3100
for more than eight hours.
By using the USB cable, connect
PI3100 to the supplied USB power
adapter.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Conserve battery power
To conserve battery power and increase
the play time, do the following:
Use the sleep mode
After the selected time duration, PI3100 goes
to the sleep mode, and the screen switches
off automatically. To save battery power, do the
following:
Go to > Display > Sleep to set the
screen-off timer to a low value.
To switch off Wi-Fi during the sleep mode,
a Go to > Wi-Fi.
b At the top bar, select > Advanced
> Keep Wi-Fi on during sleep. Select
Never.
Switch the device on or off
Press and hold the power/ lock button until the
device is switched on or off.