Filter
Top Products
Changing Operating Modes
Setting up your Monitor 3-57
Setting up your
Monitor
Procedure 1. Enter the password by pressing the appropriate combination of
softkeys which are numbered 1-5.
If you enter the password correctly, you can proceed with the next
step. If not, exit the Task Window by pressing and try
again.
2. Press the softkey . Move the highlighting to the
mode you require.
3. The prompt message “Press CONFIRM to switch to selected mode“
appears. Press the hardkey .
The instrument goes through the boot-up sequence and reverts
automatically to default settings and the mode of your choice
becomes active.
Note—If you have entered either Config, Service or Demo Mode
successfully, it is possible to return to Monitoring Mode without entering
a password by pressing
Main Screen
Change Opmode
Confirm
Monitor Setup
Resume Monitor