Philips V26CT Computer Monitor User Manual


 
Alarm Setup
5-14 Alarm Functions
Alarm Functions
Setting the
Volume
Control
The QRS and the alarm tone volume can be set independently.
1. Press hardkey.
2. Press in the Alarms Selection Window.
The QRS and alarm tone are each represented by the outline of a
triangle which can be filled in. When the triangle is completely
filled, this represents maximum tone volume.
3. Press the up and down arrow softkeys to fill each triangle to the
required amount. If there is no current alarm or INOP, two short
alarm tones will sound each time the alarm tone keys are pressed
so that you can hear the effect of changing the volume.
4. Press to return to the Main Screen.
Note—The QRS tone can be derived from other sources than ECG such
as pressure or pleth. See Chapter 14, “ECG and ECG/Respiration Module
Section” for more details.
Note—Tone Modulation can also be set to On or Off in this window using
the key.
Alarms/Volume
Volume Control
Main Screen
On/Off Tone Mod.