Filter
Top Products
Data Transfer Module
Data Transfer 10-5
Data Transfer
When the module is unplugged, it retains data for at least one hour.
After data is transferred to the monitor, the module is automatically
erased. This is to ensure that the module is empty when it is used for the
next transfer.
Symbols to
Indicate Key
Functions
As detailed in the table below, some versions of this module now use
symbols, instead of words, to indicate the function of some keys. If the
monitor’s Reference Manual tells you, for example, to select the Monitor
key, you should press the key marked with the corresponding “monitor”
symbol.
The design change also means that you will now find the module’s
product number on the rear of the module’s housing, not on the front.
What is
Transferred
The module is capable of storing and transferring up to 24 hours of trend
data and demographic information. When a transfer is initiated, the
following data is transferred:
• Continuously monitored parameters (for example, ECG)
• Resampled Values
• Aperiodic measurements (for example, CO)
• All patient demographic information except bed number
• The time at which calculations were performed in the
Hemodynamic, Oxygenation, and Ventilation calculation task
windows
• Marked events
• ST events (lead changes, reference changes)
The following data is not transferred:
• Waveforms, including ST and CO waveforms
• Split Screen trends
• Arrhythmia events
Symbol Name Function Which Modules?
Monitor initiates transfer from module to
monitor
Data Transfer Module (M1235A)
Module initiates transfer from monitor to
module