Filter
Top Products
Operating Levels
1-26 The CMS and V24 and V26 Patient Monitors
The CMS and V24 and
V26 Patient Monitors
There are two reasons for changing the selection in the Task Windows:
you will either want to move to the next Task Window, or make an
adjustment to a setting.
1. To move to the next Task Window, press the softkey for the
function you require, for example . This gets you
into the Filter/Mon/Diag Task Window where you can make any
necessary adjustments.
2. To make an adjustment, change the selection by pressing the
softkey for that window again, until the adjustment or change you
want is active, or use the arrow keys if they are illuminated.
Filter/Mon/Diag
Pts
Refernce