Philips V26CT Computer Monitor User Manual


 
Attaching the Patient
Getting Started 2-11
Getting Started
If your monitor is connected to a Philips patient care system while the
monitor is in standby, no parameter data from your monitor is sent over
the system. Instead, a message indicating that your monitor is in
“Standby” is sent to other beds in the system, and is displayed at the
central station. If your bed is configured to receive alarms, and another
bed in the system goes into alarm, the status message “Other Bed in
Alarm” is displayed on your monitor. You will hear the overview prompt
tone (two double beeps), but the Alarm Bed Task Window will not be
displayed.
To resume monitoring, simply press one of the keys (except )
on the control panel on the front of the display or on the handheld keypad
(CMS only). The changes and adjustments that you made to the settings
before going into Monitor Standby are retained. Patient Data Management
information collected before going into Monitor Standby is also retained.
As all monitoring is suspended, no patient data is collected while the
monitor is in Monitor Standby.
The hardkey operates as usual when you are in Monitor
Standby, so you can prepare the monitor alarm capability before you
resume monitoring.
Suspend
Suspend