Philips V30 Computer Monitor User Manual


 
General Troubleshooting Guide
It is need to check and
repair the monitor.
OK
END
NO
MOIRE
YES
: Moir is a natural effect or phenomenon of CRT that has the appearance of a wavy pattern
which is repetitive and superimposed on the screen as ripple images. , not just Philips monitor had.
These are a few suggestions to help for reducing or minimizing the effect.
- Some monitors have a Moir cancellation feature, activate it to the on position
or adjust the Moire cancellation function via the OSD manipulation on the monitor.
- Change resolution to the recommended standard for the specific monitor size.
- Change Window viewing pattern/scheme to a pattern where the moir is less visible.
- Change horizontal and vertical size to optimize the reduction of the moir effect.
MOIR
A fringe pattern arising from the interference between two superimposed line patterns.
In a monitor it comes from the interference between the shadow mask pattern
and the video information (video moir , and between the shadow mask
and the horizontal line pattern (scan moir . It shows itself as wavy patterns
on the screen and becomes more noticeable as monitor resolution increases.
Since the video signals varies continuously, little can be done about video moir
Scan moir depends on the horizontal scanning frequency and can be alleviated
by appropriate choice of this frequency. Autoscan (MultiSync) monitors, however,
which operate over a range of scanning frequencies,
may sometimes exhibit moir in certain video modes.
Several sources can act as a catalyzer to produce Moire. They are : The CRT,
shadow mask, the electron beam spot size, the resolution, video patterns,
and the horizontal and vertical size.
11
99
9
Go to cover page
107T5