Pioneer avic-z2 Server User Manual


 
12
Chapter 2
How to Use the Navigation System and Names of the Parts
3 V button
Press to enter the PICTURE ADJUSTMENT
mode.
Operating the Picture Adjustment Opera-
tion Manual
Press and hold to turn off the back light of the
LCD panel. To turn on the back light, press this
button again.
4 Signal receptor
This area receives signals from a remote control
(sold separately).
5 VOL (/) button
Press on the side of the button to increase the
volume of the audio source. Press on the side
to decrease the volume of the audio source.
You cannot adjust the phone volume or the vol-
ume of the navigation features (e.g. guidance
voice).
6 AV button
Press to switch the screen to the audio operation
screen. If you press the AV button again, the
source switches.
Press and hold the AV button to turn off the
source.
7 MENU button
Press to display a navigation menu of the naviga-
tion system.
Press and hold to display “Phone Menu” when
the Bluetooth unit (sold separately) is connected
to this navigation system.
8 MAP button
Press to display the navigation map screen. Also,
when the map is scrolling, pressing this button
returns you to the display of the map of your sur-
roundings. Use this button to switch the naviga-
tion view mode when the map of your surround-
ings is displayed.
9 TRK (/) button
Press this button when the built-in DVD drive
source is selected to skip a track or a chapter.
Press and hold to fast forward/fast reverse a track
or a chapter.
Various operations are possible depending on
the Audio source.
a P.LIST (/) button
Press to change the discs in the magazine when
using a multi-CD player (sold separately).
Press to switch preset channels when using the
radio.
Various operations are possible depending on
the Audio source.
b T button*
Preset button for Traffic audio service provided by
XM or SIRIUS satellite radio tuner (sold sepa-
rately). Press and hold this button while on the
desired channel to assign preset and you can
recall that later. Press once to tune to that station
from any source.
When the XM tuner and SIRIUS tuner are not
connected:
Not used.
“Using the AV Source (XM, SIRIUS)” Opera-
tion Manual
c LCD panel
d LCD screen
e Disc loading slot
Insert a disc to play.
f EJECT button
Press to eject the disc from the disc loading slot.
About the Power Supply of the
Navigation System
How to turn the power on or off
The power to this navigation system turns on or
off with the ignition switch (ACC) of the vehicle.
There is no power switch.
How to turn off the screen tem-
porarily
Touch and hold the V button to turn off the
screen for a while. The navigation system enters
standby mode.
*: XM (GEX-P10XMT, GEX-P920XM) or SIRIUS
(SIR-PNR2) satellite radio tuner is required,
together with the respective active subscrip-
tion.
CRB2295A_U_English.book Page 12 Monday, December 11, 2006 10:33 AM