Filter
Top Products
J693 11
Mount the ribbon so that it is dispensed in the appropriate direction for the
ribbon type.
Slide the ribbon on completely to rest against the flange.
Route the ribbon under the Ribbon Roller then out the front of the printer.
Continue routing the ribbon up to and around the Ribbon Take-Up Hub, as
shown. Wind the ribbon around several times in a clockwise direction to
secure it in place.
Lower the printhead and rotate the Printhead Latch back to the locked
position. Close the Access Cover.
With the printer ‘On’ press and hold the FEED button for three seconds to
position the labels for printing; see Section 5.2 for details.
Ribbon routing path
Ribbon Removal:
Pull the empty core from the Ribbon Supply Hub and discard it. Next, grasp
the used ribbon on the Ribbon Take-Up Hub, while gently pulling out on the
hub, compress the hub to pull off the used ribbon.