Filter
Top Products
9.2 IP Filtering
Use the IP Filtering to restrict particular LAN IP addresses from accessing the Internet.
You can assign the specific IP address and choose Protocol to configure.
Parameter Description
Enable IP Filtering
Click to enable the IP filtering security function.
Local IP Address
Protocol
Comment
To restrict data transmission from local network on certain
IP addresses, fill in the IP address and the protocol, also
put your comments on it.
The Protocol can be TCP, UDP or Both.
Comments let you know about whys to restrict data from
the IP address.
Apply Changes Click the Apply Changes button to register the IP address
to IP filtering list.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
Delete Selected
Click to delete the selected IP address that will be removed
from the IP-filtering list.
Delete All Click to delete all the registered entries from the IP-filtering
list.
Reset Click the Reset button to abort change and recover the
previous configuration setting.