Filter
Top Products
ViewStation EX User Guide
98 www.polycom.com
Setting the Gateway and Gatekeeper
The Gateway & Gatekeeper screen allows you to enter advanced
H.323 information, a Gatekeeper IP address if needed, and select a
route for your outbound calls.
To access the Gateway & Gatekeeper screen:
Select System Info > Admin Setup > LAN/H.323 > H.323 >
Gateway & Gatekeeper.
Changes made in the Gateway & Gatekeeper screen will cause the
system to automatically reset itself in order to enable the new
configuration and properly register with the Gatekeeper.
Figure 4-6. Gateway & Gatekeeper Screen
On this screen, you can set the following options:
❑ H.323 Name—If you are registered with the Gatekeeper, this is
the name that can be used to call your system.
❑ H.323 Extension (E.164)—H.323 extensions are needed for
inbound calls going through a Gateway. This extension number
is associated with a specific LAN device. Incoming callers are
prompted to enter the H.323 extension to access a specific LAN
device behind the Gateway. This number may be assigned by
the telephone company or by your network administrator.
❑ Use Gatekeeper—The options are Off, Specify, and Auto.
•Off: If you do not want to access a Gatekeeper, select the
Off option.