Filter
Top Products
Chapter 5 - Using the ViewStation EX
© Polycom, Inc. 2003 149
2. Use the numeric keypad on the remote control to enter the
number you want to dial.
If you need to enter alpha characters, press the AUTO button on
the remote control to bring up the keyboard.
Note
When you enter a number using the remote control, you can
hear a voice confirmation of that number from the ViewStation
EX system. This feature, Keypad Audio Confirmation, supports
English, French, German, Portuguese, Spanish, and Chinese. It
can be enabled on the General Setup screen by selecting the
Keypad Audio Confirmation option.
3. Use the arrow buttons on the remote control to highlight the
Speed icon on the screen and select the speed of your call from
the list that appears.
4. Use the arrow buttons to navigate down to select the call type
(AUTO, ISDN, or IP) and the desired call speed. If you select
AUTO, the system will figure out automatically which call type
to choose based on the format of the number you have entered.
5. Press the green CALL•HANG-UP button on the remote control
to place your call. The number and the speed that you are
dialing appear at the top of the screen.
The call progress indicators on the lower left side of the screen
indicate that the call is going through.They change
progressively to blue, yellow, orange, and green as your call
completes.