Filter
Top Products
Chapter 7 - Using the System with a PC
© Polycom, Inc. 2003 237
4. A thumbnail of each loaded slide appears on the Presentation
Directory screen so that you can see all of the slides at once. Use
the arrow buttons on the remote control to highlight a slide, and
then press the SELECT button on the remote control to view it.
Figure 7-7. Presentation Directory (showing Loaded Slides) Screen
5. To get information about the slide you are viewing, press the
INFO button on the remote control. The names of the presenter
and the presentation appear, as well as the slide number, and
the viewing password. The viewing password is set in the
Security screen as the Meeting Password field (System Info >
Admin Setup > Security). You can change the password on a
presentation while you are viewing it by highlighting the
Viewing Password field on the Slide Presentation Information
screen and entering a new password.
6. Use the remote control to move through a presentation, as
follows:
• To move backward and forward through your
presentation, use the LEFT and RIGHT ARROW buttons.
• To go to the beginning of the presentation, press the UP
ARROW button.
• To go to the end, press the DOWN ARROW button.
• If you want to go from viewing a slide to viewing its
thumbnail, press the MENU button on the remote control.
Press the SELECT button on the remote control to return to