Filter
Top Products
ViewStation EX User Guide
302 www.polycom.com
Data conferencing is only available during ISDN (H.320) calls and
must be supported by far-site systems.
Note
For more information about ShowStation IP, see ShowStation IP in
chapter 2. For more information about data conferencing using
NetMeeting, refer to NetMeeting in chapter 7.
To access the Data Conference screen:
Select System Info > Admin Setup > Data Conference. The Data
Conference screen appears.
Figure A-3. Data Conference Screen
If you want to use the system’s data conferencing capabilities, you
must first enable them. Following is a description of the data
conference options available on this screen:
❑ First icon—Enable the first icon if you want the system to
perform data collaboration: sharing applications on your PC
through the system while in an ISDN (H.320) call. Enter the IP
address of your PC into the field next to this icon. This icon will
only appear if you have a BRI or V.35/RS-449/RS-530 network
connection on your system. This icon will not appear if your
system only supports IP (H.323). For more information about
application sharing and using NetMeeting during a video call,
refer to NetMeeting
in chapter 7 and to the Visual Concert FX
User Guide.