Filter
Top Products
ViewStation EX User Guide
332 www.polycom.com
Security Screens
This section provides information about the Admin and Meeting
Password screen and the Security screen.
Admin and Meeting Password Screen
The Admin and Meeting Password screen is part of the out-of-box
configuration sequence. It features unique factory default
passwords: it contains an initial administrator password, which is
your system’s serial number, and a meeting password that is
randomly generated. For additional information, refer to Setting the
Administrator and Meeting Passwords in chapter 3.
Security Screen
The Security screen lets you set the passwords used to access your
ViewStation EX system remotely. You are not required to set
passwords on your system.
To access the Security screen:
>> Select System Info > Admin Setup > Security.
❑ Admin Password—This password is used to protect nearly all
setup screens in the user interface. When using the system Web
interface, you are required to enter the admin password, if one
has already been set in the Security screen.
❑ Meeting Password—This password is used:
• As the password for the system when it is used as an MCU
in a multipoint conference.
• For dialing into an MCU with a password already set.
• As the password for viewing slides on the Web interface.
• As the password for viewing streams on the Web interface.