Filter
Top Products
ViewStation EX User Guide
46 www.polycom.com
Figure 2-6. Softupdate Screen
3. Click the Softupdate button, as shown in Figure 2-6.
4. Enter the IP address of the system and the administrator
password, if required, then click OK.
5. In the System Info screen, specify whether to delete the address
book and system files during the update.
6. Determine whether you want to make your system a DHCP
server. Selecting the Allow System to be a DHCP Server option
will make the Server button visible on the LAN & Intranet
screen in the user interface (System Info>Admin
Setup>LAN/H.323>LAN/Intranet>LAN&Intranet).
Warning
Do not select the Server option if your system is on a LAN with
other computers. If you do, the system provides IP addresses to the
other computers on the LAN even though the LAN already has a