Filter
Top Products
Chapter 2 - Installing the ViewStation EX
© Polycom, Inc. 2003 51
For Windows 2000:
a. Right-click the My Network Places icon, and then
right-click Properties.
b. In the Network and Dial-up Connections window,
right-click Local Area Connection, and select Properties.
c. In the Local Area Connection Properties window,
double-click Internet Protocol (TCP/IP).
d. In the Internet Protocol (TCP/IP) Properties window, make
sure the Obtain an IP Address Automatically button is
selected. Then click OK.
5. Restart your PC and insert the update CD into your drive. Or
access the Softupdate.exe file from the Polycom Web site
: 1. Go
to the software download center at www.polycom.com. 2.
Locate your product name and provide the required
information. 3. Run the Softupdate application to download the
latest software and update your system. Note that you need to
decompress the file before you can run the Softupdate
application.
6. Double-click the Softupdate.exe icon to open the application.
7. When the application opens, click the Softupdate button.
8. Enter the IP address of your system in the dialog box that
appears. If you have an administrative password, enter it here
and click OK. If you don’t have a password, leave it blank and
click OK.
9. Softupdate will locate your system and provide basic
configuration information. To delete your existing address book
and files, check the appropriate boxes.
10. Check the box Allow System to be a DHCP Server. Then click
the Continue button.
11. As the software is being upgraded, you will be informed of its
progress. When it is finished, click the OK button. The system
will automatically reboot. Your system software has been
loaded.
12. If you have purchased an MP upgrade key for multipoint calls,
please refer to Upgrading the System for Multipoint Calls
on
page 55 for instructions on entering the key.