Filter
Top Products
Chapter 3 - Initial System Setup
© Polycom, Inc. 2003 73
Prefixes and suffixes are a function of your DCE. Please consult the
DCE user guide for additional information on setting dialing
profiles.
Entering V.35/RS-449/RS-530 Video Numbers
If you enabled RS-366 Dialing, the Video Numbers screen appears.
Figure 3-10. Video Numbers Screen
To enter video numbers:
1. Enter the numbers that other sites can dial to call your system.
2. When you have finished, review your entry, then highlight the
Save icon and press the SELECT button on the remote control.
For additional information about V.35/RS-449/RS-530
configuration, see Advanced V.35/RS-449/RS-530 Network
Interface Configuration on page 103.
The initial configuration process specific to the V.35/RS-449/RS-530
network interface is complete. To continue with the initial
configuration process, skip to Final Out-of-Box System Setup
Screens on page 77.
Note
If you disabled RS-366 Dialing, you are operating in direct connect
mode and the Video Numbers screen will not be displayed.