Filter
Top Products
ViewStation EX User Guide
80 www.polycom.com
Verifying Initial Setup
After the initial system configuration is complete, the system
returns to the main menu.
The main screen is the starting point for everything you do on the
ViewStation EX. From the main screen you can access the Video
Phone screen (by selecting the Video Call icon), the Address Book,
all the System Info screens, and the Telephone.
The following information explains how to place a test call, and how
to interpret the main screen’s network connectivity indicators.
Placing a Test Call
Once you have configured your ViewStation EX, you can place a test
call to one of the numbers that have been pre-programmed into the
Address Book of your ViewStation EX.
To place a test call:
1. Highlight the Address Book icon on the main screen and press
the SELECT button on the remote control.
2. Highlight the Address Book icon again and press the SELECT
button on the remote control.
3. Use the arrow buttons on the remote control to select a location
and press the SELECT button on the remote control to place the
call.
Checking the Network Connectivity Indicators on the Main
Screen
Network connectivity indicators are also displayed on the main
screen (see the following section for more information).