Filter
Top Products
Step 5
Raise the projector with the mounting bracket and slip through
the hinge pin slot openings on the bracket into the base box.
Loosely install the two hinge pin bolts, spacers and washers and
the angle locking bolts. Adjust the angle and lock it. Then tighten
the hinge pin bolts.
Do not over tighten! .
The ceiling should be capable of supporting a weight of
at least five (5) times the projector(s) or
monitor(s)weight. If it cannot, the ceiling must be
reinforced. Proper installation procedure by qualified
personnel as outlined in the installation instructions
must be adhered to. Failure to do so could result in
serious personal injury.