Filter
Top Products
DAILY OPERATION
25
when not in set up mode.
When ALIGN/ITEM is pressed, the ALIGN PRINT
MENU is displayed. Press ALIGN/ITEM again to
enter the horizontal adjustment. Pressing the
UP/DOWN ARROW buttons will move the print
position on the line left or right by 0.01 inches for
each press of a button as indicated on the
display. The arrows to the side of the number
will indicate the direction the print will be moved.
To access the vertical adjustment, press the
ALIGN/ITEM button. Pressing the UP/DOWN
ARROW buttons will now move the print up or
down on the page by 0.01 inches for each press
of a button as indicated on the display. The
arrow to the right of the number will indicate the
direction the print will be moved.
To exit ALIGN mode, press the ONLINE button.
For a more detailed description, see “Aligning
Print” later in this chapter.
Selecting and Loading Forms
Note: A form is not considered “loaded” by merely placing the
form in the tractors. To prevent printing on the wrong form,
the printer must be made aware of what form(s) are
currently loaded. When a new form is placed in the tractors,
the form must be “loaded” using the control panel as
described in the next section, “Loading a New or Different
Form in the Tractors”.