Filter
Top Products
Genicom 3840 and 3410 ANSI Emulation
117
Escape Sequence: ESC H
Hexadecimal: 1B 48
Set Horiztonal Tab Stop HTS
If 8-bit control code processing is enabled then.
Control Code: HTS
Hexadecimal: 88
Clear Tabs ESC [(Ps)g
Ps effect
0 clear horizontal tab at current print position
1 clear vertical tab at current position
3 clear all horizontal tabs
4 clear all vertical tabs
Example: Clear all horizontal tabs
Escape Sequence: ESC [ 3 g
Hexadecimal: 1B 5B 33 67
Set Horizontal Tabs At Certain Positions ESC [(p1)(p2);..(p22)u
Sets up to 22 stops at one time. The value of p1, p2, etc. are in decipoints (1 inch = 720 decipoints).
Sets tab stops at 1 inch and 4 inches. Existing tab stops are not cleared. Margin settings have no effect on
the positions of tab stops.
Escape Sequence: ESC [ 7 2 0 ; 2 8 8 0 u
Hexadecimal: 1B 5B 37 32 30 3B 32 38 38 30 75
Vertical Tab
Vetical Tab VT
Advances paper to the next vertical tab setting . If the current print position is at or beyond the last tab
setting, paper advances to the top of form. If no tabs are set, then VT is processed according to the status of
emulation option strap 14.
Control Code: VT
Hexadecimal: 0B
Set Vetical Tab ESC J
If 8-bit control code processing is enabled then
Escape Sequence: ESC J
Hexadecimal: 1B 4A