Filter
Top Products
Genicom 3840 and 3410 ANSI Emulation
120
Graphics Density ESC [(p1)q
Sets the graphics density. The printer powers up with a graphics density of 72 x 72 dpi; changes are not
stored in NVRAM.
p1 horizontal density vertical density
0 72 dpi 72 dpi
1 144 dpi 72 dpi
Escape Sequence: ESC [ 1 0 q
Hexadecimal: 1B 5B 31 30 70
Printer Control
Bell BEL
Causes the printer’s bell to sound.
Control Code: BEL
Hexa decimal: 07
Control Sequence Introducer CSI
The CSI character is the control function introducer for the ANSI control sequence. Control sequences are
multi-character control functions that accept parameters.
Control Code: CSI
Hexadecimal: 9B
Oversized Font/Bar Code Mode ESC [(p1)t
p1 effect
0 reset special modes
1 select oversized printing
3 select bar code
Oversized printing and bar codes are explained in separate chapters. Expanded printing is not supported.
Example: select oversized printing
Escape Sequence: ESC [ 1 t
Hexadecimal: 1B 5B 31 74
Reset ESC c
Recalls the user format presently assigned to the current paper path.
Escape Sequence: ESC c
Hexadecimal: 1B 63