Filter
Top Products
DEC LA120/210 Emulation
78
Horizontal Margins
Printing is allowed only within the left and right margins. Exceeding the right margin will cause line wrap,
setting the current print position to the left margin and advancing the paper one line.
Set Left and Right Margin ESC [ n1 ; n2 s
Sets the left margin to column n1 and the right margin to column n2 at the current character spacing.
0≥n1≥255, 0≥n2≥255. If character spacing is changed after setting the margins, the position of the margins
will not change.
The margin settings are inclusive. For example, a left margin at column 11 allows a character to be printed in
column 11, but not in column 10. A right margin at column 75 allows a character to be printed in column 75,
but not in column 76.
The leftmost column is column one. If n1 or n2 is zero (or is omitted), the corresponding margin is not
changed. The left margin must be left of the right margin and ≥13.4 inches. The right margin must be right of
the left margin and ≥13.6 inches. Invalid margins will be ignored. Overrides the “Left Margin” and “Right
Margin” values in the forms menu.
Example: The following escape sequence will set a one inch left margin, and will set a right margin 7.5 inches
from the left edge of the form, if character spacing is currently 10 cpi. For a standard 8.5 inch wide form, this
would result in a one inch right margin.
Escape Sequence: ESC [ 1 0 ; 7 5 s
Hexadecimal: 1B 5B 31 30 3B 37 35 73
Example: The following escape sequence will set the left margin to column 10, without affecting the right
margin.
Escape Sequence: ESC [ 1 0 s
Hexadecimal: 1B 5B 31 30 73
Example: The following escape sequence will set the right margin to column 75, without affecting the left
margin.
Escape Sequence: ESC [ ; 7 5 s
Hexadecimal: 1B 5B 3B 37 35 73