Filter
Top Products
Operating the Printer 3–11
f. Press DOWN (
B ) until Printer Tests “Shift Recycle” appears on the display.
g. To start test, press ENTER.
h. To stop test, press ENTER.
i. Press UP + DOWN (
Y + B ) until ENTER SWITCH “LOCKED” appears
on the display.
j. Examine the print quality. The characters should be fully formed and of
uniform density.
k. If the print quality is good, close the printer cover; press ON LINE to
enable printing.
NOTE: The ENTER key lock and unlock function can be configured to be
other than Y+B (See page 4–93
).
Unloading Paper from the Power Stacker
Removing Paper from the Printer:
1. Unload paper from the print mechanism.
2. Open the rear cabinet door.
3. Using the rear control panel, press ST
ACKER UP
and wait for the stacker to
reach the top of its travel.
4. Remove the paper from the rear of the printer.
5. Close the rear cabinet door.